Can You Shave With Just Water? Detailed Answer for You!

Sharing is caring!

I’m sure you have been wondering if it is possible to get a good shave without the use of shaving cream.

The short answer is YES.

The long answer is that it takes a little practice and you will never get as close as you would with shaving cream.

If you are out camping, stuck in the mountains with just water, or just left your can at home then you will have to rely on this old-school trick.

Follow these 5 Steps to Get a Close Shave Using Just Water

Before you start shaving, make sure you have all the accessories you want to use.

It’s easy to remember something when you’re already in the middle of shaving.

And remember, shaving your head needs not just a gentle hand but also concentration. So, this step is absolutely important.

The other thing you want to do is ensure the razor/blade you intend to use is sharp enough. This is worth checking especially if you’ve not used it for a while.

Once these things are in place, start with the process:

1. Start by Wetting Your Head With Water

This is the most important step to shaving with just water. If your head isn’t wet enough then the blade will not be able to glide across your skin smoothly.

However, you can make this step even more important by ensuring that you hydrate your skin before applying any razor to it.

See also  Is Duke Cannon Soap All Natural? Find Out Now!

You want to give your pores time to absorb the water and expand. This allows for a closer shave and prevents nicks and cuts.

2. Apply A Blade To The Area You Want To Shave

You want to have a light hand when shaving with just water. You are not going to get as close of a shave using this method so you will only need a minimal amount of pressure.

Also, try to keep your razor at a 30-degree angle.

If you are applying too much pressure then the razor won’t be able to glide across your skin without scratching or cutting it.

3. Shave The Area

Now that you have applied a razor to the area and made sure it is wet enough you will be able to shave. You want to go with the grain of your hair.

This means that if your hair grows downward then you want to shave downwards as well. If your hair grows upward then you should shave upwards as well.

If you aren’t sure then it is always safe to go with the grain.

If you do not know what the grain is then try a small area of your head and see if any hair comes out afterward or if there are any red bumps.

You will want to shave in small sections so that you can keep up with all parts of your head.

4. Rinse The Area and Repeat

Rinse your razor after each stroke to remove hair and shaving cream.

You may need to make three passes in order to get all the hair. If you do not, then go over the area one or two more times until all of the hair is gone.

Then rinse your head again and pat it dry with a towel.

5. Apply A Moisturizing Lotion

After shaving with just water you will probably notice that your skin is a little dry.

See also  Mend Skin: Discovering Advanced Skincare for Men

That is why you should apply a moisturizing lotion to it.

This will help replenish the moisture and also help prevent razor burns and red bumps. You can use an after-shave balm as well or simply apply a little bit of lotion.


Shaving with just water is not as close to a shave as when you use shaving cream. It is possible to get good results but you will need some practice in order to master it.

Also, this method does not work for everyone so you should try it on your head first before using it anywhere else on your body.

There are also many other alternatives to shaving cream. You can use a hair conditioner or even soap. So, you don’t always need shaving creams.

It’s not just about the head. You can use this method on your chest, legs, down there, and your armpits.

It’s your decision to make. And since it is effective, you shouldn’t be hesitating to use it in these areas.

How Long Do Shaving Cuts Take To Heal?

Shaving cuts are common enough, so it’s helpful to know how long shaving cuts take to heal for obvious reasons.

When you pay attention to the basic guidelines and do things right, you can quickly and easily treat a shaving cut.

Then, the next time you come across the same situation, it will be easier to treat, and you’ll have more experience under your belt.

This should all make for a more positive outcome and doesn’t cause too much stress along the way when all is said and done.

How Long Do Shaving Cuts Take To Heal?

Shaving cuts are minor cuts or scrapes to the skin. These injuries typically occur while shaving due to a dull razor blade or improper shaving technique.

Most of these wounds are minor and cause little bleeding.

See also  Fruity Smelling Shampoo

The exact length of time it takes for the cut to heal will depend on its location and severity.

In general, most shaving cuts will heal within two weeks. Some may take up to 3 weeks to heal completely, though this is rare.

Treatment of shaving cuts is quite simple. The cut needs to be cleaned and then allowed to heal naturally. In most cases, no further medical intervention is required.

On rare occasions, the wound may need stitches or other treatment if it is large enough or deep enough for concern.

Tips to avoid shaving cuts

1. Prepare your skin and hair before wet shaving. Use a facial scrub to exfoliate your skin, removing dead skin cells and allowing the razor to glide smoothly over the skin. Massage in a pre-shave oil to soften and lift the stubble, allowing the blade to cut each hair easily.

2. Use a sharp razor or blade. A dull blade is much more likely to snag or cut your skin. You should change your blade after every 5-7 shaves, storing it between uses in a dry place away from moisture, which can cause rusting and damage to the blades.

3. Rinse your razor under hot water regularly during shaving to keep it clean and free of soap residue and hair clippings that may dull the blade.

4. Shave with the grain of hair growth – in other words, shave downwards with your chin and jawline and upwards on your neck – to avoid tugging at hairs too hard or going over the same area too many times which can cause irritation or cuts.

5. Always use a good quality shaving cream or soap that will allow your razor to glide smoothly over your skin without causing friction or irritation – this is particularly important for sensitive skin types.


Despite the stigmas and myths surrounding shaving cuts, they are actually a widespread occurrence.

Men with coarse or curly facial hair, men who shave daily, and athletes who shave often can all be more susceptible to cuts on their face and throats when removing facial hair.

But as long as you’re careful and use proper shaving methods, you should be able to get through it with minimal fuss.

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *